|
An ice hockey stick is a piece of equipment used in ice hockey to shoot, pass, and carry the puck. Ice hockey sticks are approximately 150–200 cm long, composed of a long, slender shaft with a flat extension at one end called the blade. The blade is the part of the stick used to contact the puck, and is typically 25 to 40 cm long. Stick dimensions can vary widely, as they are usually built to suit a particular player's size and preference. The blade is positioned at roughly a 135° angle from the axis of the shaft, giving the stick a partly 'L-shaped' appearance. The shaft of the stick is fairly rigid, but it has some flexibility to benefit some shots. The blade is slightly curved in one direction, either way, to aid in retaining or lifting the puck off the playing surface. This can be to the left or right, depending on the player's shooting orientation. The goaltender has a slightly modified stick. The lower part of the stick is wider, the angle is smaller, and the blade is slightly curved towards the direction of the play. New goalie sticks also are made of the same composite technology as used in regular sticks. == History == There are numerous references to the Mi'kmaq people of Nova Scotia playing hockey from as early as the 18th century. There are claims from the nineteenth century that the Mi'kmaq invented the ice hockey stick.〔Brian Cutherbertson The Starr Manufacturing Company: Skate Exporter to the World. Journal of the Royal Nova Scotia Historical Society, Vol. 8, 2005, p. 60〕 The oldest known hockey stick was made in 1830's.〔( Globe and Mail newspaper and other Canadian media January 10, 2015 )〕 This stick was made by William Moffatt between 1835-38 from sugar maple wood. This stick was sold to the Canadian museum of history for $300,000 bought by a social worker in New Brunswick off a barber for $1000. This is the most expensive AUTHENTICATED hockey stick in the history of the game. Another unauthenticated stick made in 1850 's sold for $4 million in America. In the mid-nineteenth century, the Starr Manufacturing Company began to sell the stick nationally and internationally.〔Brian Cutherbertson The Starr Manufacturing Company: Skate Exporter to the World. Journal of the Royal Nova Scotia Historical Society, Vol. 8, 2005, p. 61〕 Hockey became a national sport in Canada in the 1890s.〔Cutherbertson, p. 58〕 Throughout the first decade of the twentieth century, the Mic-Mac hockey stick was the best selling hockey stick in Canada. By 1903, apart from farming, the principal occupation of the Mi'kmaq on reserves throughout Nova Scotia, and particularly Shubenacadie, Indian Brook and Millbrook Reserves, were producing the Mic-Mac Hockey Stick.〔 The department of Indian Affairs for Nova Scotia identified in 1927, that the Mi'kmaq remained the "experts" at making hockey sticks.〔Brian Cutherbertson The Starr Manufacturing Company: Skate Exporter to the World. Journal of the Royal Nova Scotia Historical Society, Vol. 8, 2005, p. 73〕 Mi'kmaq continued to make hockey sticks until the 1930s.〔Brian Cutherbertson The Starr Manufacturing Company: Skate Exporter to the World. Journal of the Royal Nova Scotia Historical Society, Vol. 8, 2005, p. 63〕 Hockey sticks were mostly made from the maple or willow trees, which was also a common choice for golf club shafts and wooden tools. However, as hornbeam supplies diminished, it became more cost effective to use other hardwoods, such as yellow birch and ash. Ash gradually became the preferred medium, and by the 1920s an ash hockey stick crafted from a single piece of wood was the type most commonly used. These early sticks were extremely heavy and not very forgiving, although they were extremely durable (Hall of Famer Moose Johnson famously used the same extra-long stick, which gave him a reach, his entire career). There were only a handful of major developments in hockey stick technology between the 1920s and the 2000s. Foremost among these was creation of the laminated stick in the 1940s, where layers of wood were glued together and sandwiched to create a more flexible and durable design. In the 1960s, companies began adding another lamination of fiberglass or other such synthetic compound as a coating, which further added to the durability and usability of the stick. Also in the 1960s, players began curving the blade of the stick, which dramatically changed the physics affecting players' shots. In the 1970s, cricket and baseball bat manufacturers began experimenting with lightweight steel alloys as a replacement for the traditional willow or ash bat. Hockey stick designers followed suit in the early 1980s, introducing first a single piece all-aluminium stick. This design was not popular, as the stiff aluminium did not have the proper "feel", and so a design featuring an aluminium shaft and a removable, replaceable wooden blade was tried. This became very popular in the late 1980s and early 1990s, challenging the prevalence of the traditional wooden stick for the first time. In recent years, the aluminium stick, as well as its wooden counterpart, have largely been replaced by more advanced composite designs. Common building materials include fiberglass and carbon fiber, and some manufacturers have even explored using materials such as kevlar. Composite sticks generally weigh less than their aluminum forebears, and they can be manufactured with more consistent (and varied) physical properties than their wooden counterparts. They are, however, considerably more expensive than wooden sticks, and are not nearly as durable as the older aluminum sticks. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「ice hockey stick」の詳細全文を読む スポンサード リンク
|